New
Normal
High performance street cam
Suits 3 bolt cam gear
Must use 15 Tooth oil pump gear Part Number 60062
Requires roller rockers, dual springs and retainers, carby and extractors
Customer to advise whether they have multi or single groove valves
Crow Cams recommend purchasing 2x bottles of ZDDP additive with any flat tappet cam, one for the initial run in and one for the first oil change thereafter
| RPM Range | Part No. | Duration | with 1.73 Rocker | Lobe Sep Angle |
Lash
Measured Hot |
|||||
|---|---|---|---|---|---|---|---|---|---|---|
| Advertised | @.050” | |||||||||
| IN | EX | IN | EX | IN | EX | IN | EX | |||
| 3200 - 6500 | 6690 | 296° | 309° | 238° | 243° | 0.550 | 0.550 | 108 | HYD | HYD |
Must use performance springs.
Must use performance retainers (check if single or multi groove valves)
Machining required to fit these components.
Must use performance seal.
Check valve train geometry before ordering pushrod.
Pushrod length varied in this model. Check length before ordering.
Spring height varies in models, check spring pressure before installation
Crow Cams recommend purchasing 2x bottles of ZDDP additive with any flat tappet cam, one for the initial run in and one for the first oil change thereafter. View our Downloads tab for a Flat Tappet run in procedure check list.
Converter stall speed should be equal to or greater than the minimum rpm of the cam power range.