New
Normal
Performance solid cam
Needs premium valve train parts
See fitting notes
Crow Cams recommend purchasing 2x bottles of ZDDP additive with any flat tappet cam, one for the initial run in and one for the first oil change thereafter
Performance solid cam
Needs premium valve train parts
See fitting notes
| RPM Range | Part No. | Duration | with 1.62 Rocker | Lobe Sep Angle |
Lash
Measured Hot |
|||||
|---|---|---|---|---|---|---|---|---|---|---|
| Advertised | @.050” | |||||||||
| IN | EX | IN | EX | IN | EX | IN | EX | |||
| 3800 - 7200 | 15731 | 292° | 297° | 253° | 260° | 0.575 | 0.585 | 108 | .026" | .026" |
Must use performance springs.
Must use performance retainers.
Machining required to fit these components.
Must use performance seal.
Check valve train geometry to establish length before ordering pushrods.
Converter stall speed should be equal to or greater than the minimum RPM of the cam power range
Crow Cams recommend purchasing 2x bottles of ZDDP additive with any flat tappet cam, one for the initial run in and one for the first oil change thereafter. View our Downloads tab for a Flat Tappet run in procedure check list.