New
Normal
IMPORTANT NOTE
When converting early Windsor blocks to roller applications using standard style factory drop in roller lifters (5300H), you will require a camshaft with a smaller base circle. This allows for the lifters to remain low enough in the bore to not expose the oil band in the body of the lifter at full lift.
These cams will be ground to order so please allow at least 2 weeks lead time.
If using Tie bar style lifters (5351H) a standard base circle cam is suitable.
| RPM Range | Part No. | Duration | with 1.60 Rocker | Lobe Sep Angle |
Lash
Measured Hot |
|||||
|---|---|---|---|---|---|---|---|---|---|---|
| Advertised | @.050” | |||||||||
| IN | EX | IN | EX | IN | EX | IN | EX | |||
| 2600 - 6200 | 621515 | 297° | 298° | 229° | 234° | 0.575 | 0.571 | 108 | HYD | HYD |
Must use performance springs.
Must use performance retainers.
Machining required to fit these components.
Must use performance seal.
Converter stall speed should be equal to or greater than the minimum RPM of the cam power range