New
Normal
IMPORTANT NOTE
Does not suit Gen5/Gen6 thrust plate engines unless a cam button setup is used to control thrust.
Crow Cams recommend purchasing 2x bottles of ZDDP additive with any flat tappet cam, one for the initial run in and one for the first oil change thereafter
Performance cam
Great upper RPM range
Choppy idle
Needs manifold & headers, comp etc and hi stall
Due to the large variation in installed heights for these engines, please refer to our Valve Spring Specification Guide to help select the springs best suited to your application.
| RPM Range | Part No. | Duration | with 1.7 Rocker | Lobe Sep Angle |
Lash
Measured Hot |
|||||
|---|---|---|---|---|---|---|---|---|---|---|
| Advertised | @.050” | |||||||||
| IN | EX | IN | EX | IN | EX | IN | EX | |||
| 3800 - 7000 | 2909 | 330° | 333° | 250° | 259° | .635" | .635" | 110° | HYD | HYD |
Must use performance springs.
Must use performance retainers.
Machining required to fit these components.
Converter stall speed should be equal to or greater than the minimum RPM of the cam power range
Due to the large variation in installed heights for these engines, please refer to our Valve Spring Specification Guide to help select the springs best suited to your application.